Example component,Example feature,Method to agree,Record to agree,Scope limitation,Your part number,Drawing revision,Lot ID,Quantity presented,Approved acceptance reference,Lower limit,Upper limit,Units,Instrument or gauge ID,Coverage / approved sampling plan,Actual result,Material status,Reviewer / disposition,Notes
Engine block / machined casting,Accessible bore diameter,Bore gauge with the agreed setting reference; specified depths and directions,"Individual readings, units, measuring position and the applicable limits",A few diameter readings do not establish the full geometric form of a bore.,,,,,,,,,,,,,,
Engine block / machined casting,Deck condition and accessible edges,Visual examination against an approved defect standard; suitable light and viewing access,"Defect category, location, reference image and part or lot identity",Visible surface findings do not establish internal soundness or crack depth.,,,,,,,,,,,,,,
Connecting rod,Accessible small-end or big-end bore,"Agreed bore gauge or acceptance gauge, with the specified support and setup","Readings or GO / NO-GO result, gauge ID and checked feature","Do not infer centre distance, alignment or full geometry from one bore check.",,,,,,,,,,,,,,
Engine valve,Stem diameter,Suitable micrometer at the positions and directions defined by the inspection plan,Position-specific diameter readings and drawing limits,Surface condition and valve-head features need their own specified checks.,,,,,,,,,,,,,,
Gear / transmission component,Accessible bore and visible damage,Agreed bore or acceptance gauge; separate visual checks for visible damage and burrs,Feature result plus the location and type of each visible finding,These checks do not verify a gear profile or transmission performance.,,,,,,,,,,,,,,
Plastic or rubber component,"Appearance, identification and agreed accessible dimensions",Approved boundary sample; suitable low-force measurement or checking fixture,Visual category and any specified numerical or attribute results,"Part flexibility, temperature and measuring force can affect the result.",,,,,,,,,,,,,,
Passive battery enclosure,Accessible mounting feature or seal-face condition,"Agreed caliper, gauge or fixture check; separate visual examination","Feature identity, method, result and any visible surface finding",Mechanical enclosure checks do not establish leak tightness or electrical safety.,,,,,,,,,,,,,,
Your additional characteristic,,,,,,,,,,,,,,,,,,
PLANNING EXAMPLES ONLY,Replace all examples. Customer drawings and approved methods govern each assignment.,https://pisipl.in/insights/automotive-component-inspection-checklist/,,,,,,,,,,,,,,,,